Results 1 to 7 of 7

Thread: Error in library module cyclonev_atoms_ncrypt

  1. #1
    Join Date
    Oct 2012
    Posts
    3
    Rep Power
    1

    Default Error in library module cyclonev_atoms_ncrypt

    I am attempting to run a simulation with design components from QSYS.

    I am running the msim_setup.tcl script provided by QSYS and am getting the following error message...

    # vsim -t ps -L work -L work_lib -L error_adapter_0 -L altera_epcq_controller_core -L altera_asmi_parallel -L rsp_mux -L cmd_mux -L cmd_demux -L router_001 -L router -L avalon_st_adapter -L crosser -L rsp_mux_002 -L rsp_mux_001 -L rsp_demux_011 -L rsp_demux_009 -L rsp_demux_005 -L rsp_demux_004 -L rsp_demux_002 -L rsp_demux -L cmd_mux_002 -L cmd_demux_002 -L cmd_demux_001 -L epcq_controller_0_avl_mem_burst_adapter -L nios2_qsys_data_master_limiter -L router_014 -L router_007 -L router_005 -L router_003 -L router_002 -L avalon_internal_bram_interface_avalon_slave_agent -L nios2_qsys_data_master_agent -L avalon_internal_bram_interface_avalon_slave_transl ator -L nios2_qsys_data_master_translator -L remote_update_controller -L remote_update_core -L cpu -L dll0 -L oct0 -L c0 -L s0 -L p0 -L pll0 -L p2b_adapter -L b2p_adapter -L transacto -L p2b -L b2p -L fifo -L timing_adt -L jtag_phy_embedded_in_jtag_master -L rst_controller -L irq_synchronizer -L irq_mapper -L mm_interconnect_1 -L mm_interconnect_0 -L sysid_qsys -L sysclk_timer -L remote_update_0 -L onchip_mem -L nios2_qsys -L mem_if_lpddr2_emif -L mddr_to_mm_bridge_0 -L jtag_to_avalon_master -L hw_git_hash -L ext_int -L epcq_controller_0 -L avalon_internal_bram_interface -L avalon_external_interface_0 -L altera_ver -L lpm_ver -L sgate_ver -L altera_mf_ver -L altera_lnsim_ver -L cyclonev_ver -L cyclonev_hssi_ver -L cyclonev_pcie_hip_ver C5G_QSYS
    # Start time: 15:55:58 on Jun 21,2018
    # ** Note: (vsim-3812) Design is being optimized...
    # ** Error: C:/bin/altera/17.0.1/quartus/eda/sim_lib/mentor/cyclonev_atoms_ncrypt.v(38): in protected region

    Anyone have an idea on what is causing this?

    Thanks!
    Mike

  2. #2
    Join Date
    Sep 2017
    Posts
    16
    Rep Power
    1

    Default Re: Error in library module cyclonev_atoms_ncrypt

    As it is happening after the note saying that optimization has started, have you tried running it with optimization turned off?

  3. #3
    Join Date
    Oct 2012
    Posts
    3
    Rep Power
    1

    Default Re: Error in library module cyclonev_atoms_ncrypt

    Here is the result from running with -novopt....

    # vsim -novopt -t ps -L work -L work_lib -L error_adapter_0 -L altera_epcq_controller_core -L altera_asmi_parallel -L rsp_mux -L cmd_mux -L cmd_demux -L router_001 -L router -L avalon_st_adapter -L crosser -L rsp_mux_002 -L rsp_mux_001 -L rsp_demux_011 -L rsp_demux_009 -L rsp_demux_005 -L rsp_demux_004 -L rsp_demux_002 -L rsp_demux -L cmd_mux_002 -L cmd_demux_002 -L cmd_demux_001 -L epcq_controller_0_avl_mem_burst_adapter -L nios2_qsys_data_master_limiter -L router_014 -L router_007 -L router_005 -L router_003 -L router_002 -L avalon_internal_bram_interface_avalon_slave_agent -L nios2_qsys_data_master_agent -L avalon_internal_bram_interface_avalon_slave_transl ator -L nios2_qsys_data_master_translator -L remote_update_controller -L remote_update_core -L cpu -L dll0 -L oct0 -L c0 -L s0 -L p0 -L pll0 -L p2b_adapter -L b2p_adapter -L transacto -L p2b -L b2p -L fifo -L timing_adt -L jtag_phy_embedded_in_jtag_master -L rst_controller -L irq_synchronizer -L irq_mapper -L mm_interconnect_1 -L mm_interconnect_0 -L sysid_qsys -L sysclk_timer -L remote_update_0 -L onchip_mem -L nios2_qsys -L mem_if_lpddr2_emif -L mddr_to_mm_bridge_0 -L jtag_to_avalon_master -L hw_git_hash -L ext_int -L epcq_controller_0 -L avalon_internal_bram_interface -L avalon_external_interface_0 -L altera_ver -L lpm_ver -L sgate_ver -L altera_mf_ver -L altera_lnsim_ver -L cyclonev_ver -L cyclonev_hssi_ver -L cyclonev_pcie_hip_ver C5G_QSYS
    # Start time: 15:55:58 on Jun 21,2018
    # ** Error (suppressible): (vsim-12110) All optimizations are disabled because the -novopt option is in effect. This will cause your simulation to run very slowly. If you are using this switch to preserve visibility for Debug or PLI features, please see the User's Manual section on Preserving Object Visibility with vopt. -novopt option is now deprecated and will be removed in future releases.
    # Error loading design
    # Error: Error loading design
    # Pausing macro execution

    Note that I am simply attempting to run the msim_setup.tcl generated by QSYS.

  4. #4
    Join Date
    Sep 2017
    Posts
    16
    Rep Power
    1

    Default Re: Error in library module cyclonev_atoms_ncrypt

    That's an error with turning off vopt now. Try running it again with -suppress 12110 to suppress that error.

  5. #5
    Join Date
    Oct 2012
    Posts
    3
    Rep Power
    1

    Default Re: Error in library module cyclonev_atoms_ncrypt

    After using the suppress option, the simulation gets to this and fails....

    # Loading altera_mf_ver.altera_std_synchronizer_bundle
    # ** Error: (vsim-3033) Instantiation of '<protected><protected><protected><protected><prot ected><protected>' failed. The design unit was not found.
    # Time: 0 ps Iteration: 0 Protected: /C5G_QSYS/epcq_controller_0/asmi_parallel_inst/altera_asmi_parallel/sd4/inst/<protected> File: C:/bin/altera/17.0.1/quartus/eda/sim_lib/mentor/cyclonev_atoms_ncrypt.v Line: UNKNOWN

  6. #6
    Join Date
    Sep 2017
    Posts
    16
    Rep Power
    1

    Default Re: Error in library module cyclonev_atoms_ncrypt

    Wow... That is not a helpful error message...

  7. #7
    Join Date
    Jul 2018
    Posts
    1
    Rep Power
    1

    Default Re: Error in library module cyclonev_atoms_ncrypt

    Quote Originally Posted by AndyN View Post
    That's an error with turning off vopt now. Try running it again with -suppress 12110 to suppress that error.
    Thanks i had # ** Error (suppressible): (vsim-12110) message and the -suppress 12110 seemed to solve it

Similar Threads

  1. RTL Module Packaged into OpenCL Library
    By zh880813 in forum OpenCL
    Replies: 0
    Last Post: May 10th, 2017, 05:17 PM
  2. Replies: 2
    Last Post: November 12th, 2015, 09:31 PM
  3. how to compile the "cyclonev_atoms_ncrypt.v" in ModelSim SE ?
    By tigre in forum Quartus II and EDA Tools Discussion
    Replies: 1
    Last Post: October 5th, 2014, 07:02 AM
  4. cyclonev_atoms_ncrypt.v for cadence?
    By Y0tsuya in forum Quartus II and EDA Tools Discussion
    Replies: 0
    Last Post: September 25th, 2014, 04:38 PM
  5. Replies: 0
    Last Post: October 20th, 2009, 05:40 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •